3.78L Maple Granite Coating
Item #: 1817859
$49.99 / EA
  • Granite's quartz aggregate provides an extremely hard surface that is highly resistant to abrasion
  • The acrylic resins provide superior elasticity, adhesion and low water absorption
  • It can also remain breathable to permit the normal transmission of moisture vapor through the coating to assist in protecting against trapped moisture
  • Low water absorption protects against rain and snow while maintaining elasticity and superior resistance
  • Special additives protect the acrylic resins from ultra- violet rays and discolouration and assure long life, durability and performance
  • Breathability
  • Low shrinkage
  • Colourfast
  • Ultra-violet brittle resistant
  • Bacteria resistant
  • Resistant to freeze/thaw conditions
  • Flexibility
  • Pre-mixed
  • Easy maintenance
  • Crack resistant
  • Alkali resistant
  • Abrasion and impact resistant
  • High resistantance to salt
  • 100% acrylic emulsion coating with coloured quartz compounds which provide a flexible, breathable, water repellent decorative finish for long life and durability
  • Designed as finishes for stationary exterior or interior concrete, drywall and masonry floors and decks
  • Varies with substrate conditions, and application methods
  • Average coverage 32 sq. ft. per one gallon pail
  • Surface should be clean and dry, free from efflorescence, laitance, dust, dirt, loose flaking, oils, poorly bonded or glossy paint, surface sealers, salts and other contaminates which may effect adhesion and product performance
  • New masonry surfaces should be allowed to cure a minimum of 48 hours prior to application
  • Surface area should be power washed using at least 2500 psi to clear any surface contaminates
  • Smooth, new and efflorescent surfaces should be etched using a muriatic acid/ water solution (2 parts water/1 part muriatic acid), follow by neutralizing surface area with a baking soda/water solution (one 500 gr. box baking soda/2 gallons of water) and rinse area thoroughly
  • When surface is dry, prime area using Granite roll-on primer (tinted to match desired Granite colour)
  • Thorough instructions are available to consumers on reverse side of removable pail label or at www. techstone.ca
  • Thoroughly stir contents prior to application
  • May be applied by trowel or spray equipment
  • Ambient temperatures must not be less than 5 degrees Celsius, and should not exceed 40 degress Celsius during application and for a continuous period of at least 24 hours after application
  • Dry to touch in 60 minutes, depending on atmospheric conditions
  • Protect coated surfaces for 6-8 hours prior to exposure to rain or heavy condensation - In dry conditions product cure is complete in 24 hours
  • Seal the fully cured Granite finish using a lint- free roller and Tech Stone Sealer (supplied in 3.78L pails)
  • Apply 2 coats: protect surface from water and other contamination between coats
  • Do not walk on surface while it is tacky
  • Equipment can be cleaned with soap and water prior to cure of material
  • In case of contact with eyes, flood eyes repeatedly with potable water and call a physician
  • DO NOT RUB EYES due to coarseness of granules
  • Wash hands thoroughly after handling
  • Do not take internally
  • Keep container closed. Do not use in the presence of unprotected foodstuffs
  • Product which has been frozen must be discarded
  • Dispose of unused material in accordance with local, provincial and federal guidelines
  • Most stains from food or beverages can be easily cleaned using water and a deck brush
  • For more persistent stains, a mild soapy cleanser is generally sufficient
  • GR 016: Maple
  • GR 017: Pewter
  • GR 030: Sandstone
  • These are Granite's three most popular colours
  • COLOURS: Customized
  • VEHICLE TYPE: 100% Acrylic Emulsion
  • SOLIDS BY VOLUME: Sand Texture 70% +/- 2%
  • FLASH POINT: Non-combustible
  • DRY TIME @ 24C: 15 minutes to touch (4-6 hours prior to rain)
  • THINNER: Not recommended
  • ABRASION RESISTANCE: No cracking or Loss of film- integrity (ASTM D-968)
  • ABSORPTION: 2.2 (ASTM C-67-81)
  • ACCELERATED WEATHERING: 4,000 hours without blistering or cracking (ASTM G-23)
  • ACID RESISTANCE: Sulfuric, Nitric, Hydra- 6 hours acid, 2 hour dry - no blistering, cracking, wrinkling or lifting (CGSG 1-GP-71)
  • ADHESION: Passed ASTM D4541
  • FREEZE/THAW: No change after 50 cycles, ASTM C-67
  • HEMISPHERICAL SPECTRAL REFLECTION: Over cement board 74.3% (ASTM E903-82)
  • TOTAL EMITTANCE: Over cement 0.89 (ASTM E408-71)
  • MILDEW RESISTANCE: No growth after 45 days MIL. STD. 810C
  • SALT SPRAY: 2,000 hours - No deleterious effect. ASTM B117
  • WATER VAPOR TRANSMISSION: 2.3 Perms (finish) / 2.6 Perms (primer)
  • MATERIAL TESTING INITIATIVE: Progress report as of August 17, 1995 the following tests have been successfully perfomed and met or exceeded the following criteria
  • ASTM G 23-81 Accelerated Weathering Test
  • ASTM E-84 Burning Test-Surface/Tunnel Test
  • ASTM B-117 Salt Spray Fog Test
  • ASTM E-96 Vapour Transmission Test
  • ASTM D-1037 and EIMA 101.86 Impact Resistance Test
  • ASTM D-968/81 Abrasion Resistance Test
  • ASTM 1640-83 Dry Time
  • ASTM E-96-80 Permeability
  • In addition to the following Canadian Tests:
  • ULC S-101M 15 Min. Remain in Place Test
  • CGSB 1-GP-162M Freeze-Thaw Stability Test
  • CGSB 1-GP-162M Alkali Resistance, Appearance, Applicability, etc.
  • CGSB 1-GP-162M Accelerated Weathering Resistance
  • CGSB 1-GP-162M Water Absorption
  • CGSB 1-GP-162M Water Vapour Transmission
  • CAN4-S114 Noncombustability test
Prices shown do not include taxes. While every effort is made to maintain prices shown, we reserve the right to adjust prices when necessary and also to substitute or discontinue any item which may become unavailable. We reserve the right to correct printing or technical errors. Sale prices available for a limited time and while supplies last. In the event of a discrepancy in pricing between this website and our store, this store price will be considered the most current and accurate price and will supercede any and all other advertised prices.

Bring home the latest

Stay in the know with exclusive deals and event updates.

Inspiration’s always handy

Follow us for bright ideas and must-haves for every season.

Follow Us on Instagram Follow Us on Youtube
Come on in. We're open for in-store shopping.